•
On:
The Super Dynamic function will work.
•
Off:
The Super Dynamic function will not work.
•
Default:
Off
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On” is selected for “Super Dynamic”, this setting is unavailable. The back light compensation function can
compensate back light by setting mask areas on brighter parts of images.
•
On:
Mask areas will be set automatically.
•
Off:
Mask areas will not be set automatically. It is necessary to set them manually.
•
Default:
Off
[Mask area]
When “Off” is selected for “Super Dynamic” and “Back light compensation (BLC)”, it is possible to compensate
for backlight by masking brighter areas.
Refer to page 68 for descriptions of how to mask.
[Zoom] buttons, [Focus] buttons, [Brightness] buttons, Control pad/buttons
Refer to page 10 for descriptions of how to operate these buttons/pad.
[Set] button
Registers the preset positions.
[Delete] button
Deletes the preset position specified by the position number.
[Close] button
Click this button to close the “Preset position” setup menu.
Register the preset positions
1.
Select a preset position number.
→
The selected preset position number will be displayed in the “Position No” area.
When the selected number has already been registered, the camera will move to the selected preset
position.
2.
Move the camera to the desired direction.
3.
To display the preset ID on the “Live” page, select “On” for “Preset ID” and enter the desired position title
to be displayed.
4.
The settings for “Auto focus” and “Dwell time” can be configured for each position independently.
5.
Click the [Set] button.
6.
The settings for each item such as “Super Dynamic” can be configured for each position independently.
The settings for “Super Dynamic”, “Back light compensation (BLC)” and “Mask area” are updated
immediately.
Note
•
When registering the preset position, the camera direction may move slightly.
•
When a setting other than “Scene file is not applied” is selected for “Scene file” of “Image adjust”,
“Super Dynamic”, “Back light compensation (BLC)”, and “Mask area” cannot be used.
74
Operating Instructions
8 Configure the settings relating to images and audio [Image/Audio]
