Pan/tilt stabilization reduces the distortions in images. This is effective with correcting large, slow-moving
distortions.
IMPORTANT
•
If “Stabilizer” is used, the view angle will become narrower and the resolution becomes lower. In
this case, check the view angle and resolution at camera installation. The image stabilizer function
may become less effective under the following conditions.
–
Short cycled image shaking such as mechanical vibration
–
Large amplitude image shaking
•
If “Stabilizer” is used, the noise in images may be increased.
Note
•
If there is shaking at night or in dark conditions, image stabilization can become more effective by
using a high-speed shutter setting of “Max. 1/100s” or more for “Maximum shutter”. Configure
“Maximum shutter” according to the installation environment.
•
Image stabilization does not operate during Auto mode (Auto track, Auto pan, Preset sequence,
360 map-shot, Preset map-shot, Patrol), Position refresh, Washer, VMD area setting, image/
position setting, and pan/tilt operations.
•
When image stabilization is enabled, the angle of the range of the alarm detection area configured
in VMD area and VIQS area is changed. Therefore, you must reconfigure the VMD area and VIQS
area settings.
[Chroma gain level]
Adjusts the chroma level (color density).
When the cursor is moved in the “+” direction, the colors will become thicker. When the cursor is moved in the
“-” direction, the colors will be thinner. Click the [Reset] button to reset the color to the default.
•
Default:
128
[Aperture level]
Adjust the aperture level (outline compensation).
Images will be sharper when the cursor is moved in the “+” direction, and will be softer when the cursor is
moved in the “-” direction. Click the [Reset] button to reset the color to the default.
•
Default:
16
[Pedestal level]
Adjust the black level of images by moving the cursor.
66
Operating Instructions
8 Configure the settings relating to images and audio [Image/Audio]
