Registering the administrator when accessing the
camera
When the camera is accessed for the first time, an administrator registration screen is displayed.
[User name (1 to 32 characters)]
Enter a user name.
Available number of characters: 1 - 32 characters
Unavailable characters: " & : ; \
[Password (8 to 32 characters)]/[Retype password]
Enter a password.
Available number of characters: 8 - 32 characters
Unavailable characters: " &
Note
•
Entries are case sensitive so take care when entering user names and passwords.
•
3 types of characters can be used for passwords: alphabetical characters, numbers, and codes.
Passwords must be composed of at least 2 types of characters.
IMPORTANT
•
If you forgot or do not know the password or user name, the camera must be initialized. Because all
settings other than preset position settings are deleted when the camera is initialized, make sure to
keep the information secure from third parties. Refer to “About the INITIAL SW (Initial switch)” in the
“Parts and functions” section in the Installation Guide for more information about initializing the camera.
•
Make sure to change the administrator password periodically.
A registration completion screen is displayed after the user name and password registration for the
administrator have been completed. The camera will be automatically reconnected to about 10 seconds after
this screen is displayed. If the camera is not automatically reconnected to, click “here”.
Operating Instructions
3
Preface
