•
Audio detection permission:
The audio detection function will be active during the period of the
schedule.
•
Access permission:
Users whose access level is set to 2 and 3 on the [User auth.] tab
(
page 121) can access the camera only in the period of schedule.
•
Position refresh
: The camera position will be refreshed at the designated time in the schedule.
•
1-256
: The camera will move to the designated preset position at the designated time in the schedule.
•
All detect permission:
When “Viewnetcam.com” is selected for “DDNS”, only “Schedule 5” can be
selected. Alarm input is allowed during the period of the schedule. However, the schedule cannot be
changed.
•
Image adjust 1:
Scene 1:
Images are set to the image settings of “Scene file 1” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
Image adjust 2:
Scene 2:
Images are set to the image settings of “Scene file 2” at the designated time
in the schedule. When the designated time for the schedule finishes, images are set to the image
settings of “Scene file is not applied”.
•
FTP periodic image transmission:
FTP periodic image transmission will be performed at the
designated time in the schedule.
Note
•
Select “On” for “User auth.” on the [User auth.] tab of “User mng.” page (
®
page 121) and “Off” for
“Host auth.” on the “Host auth.” page (
page 122) to validate “Access permission”.
2.
Select days of a week by checking the respective checkboxes.
3.
From the pull-down menu, select the start time and the end time of the schedule.
When not designating time, check the checkbox of “24h”.
4.
Click the [Set] button after completing the settings.
→
The result will be displayed at the bottom of the window.
Note
•
The schedules displayed at the bottom of the window can be identified by colors assigned to each
schedule.
•
If the schedules for position refresh and image quality are set to the same times, the action for image
quality will be performed after the action for position refresh is finished.
176
Operating Instructions
13 Configure the settings relating to the schedules [Schedule]
