![background image](http://html1.mh-extra.com/html/panasonic/wv-nw484se/wv-nw484se_setup-manual_4256447018.webp)
18
(4)
[Image quality]
Default: Normal
Select the image quality of MPEG-4 images.
Low
Movement is given priority. (Images become grainy.)
Normal
This is the normal setting.
Fine
Image quality is given priority. (Operation becomes slower.)
(5)
[Refresh interval (MPEG-
4)]
Default: 3 sec
Select an interval (i-frame interval) to refresh the displayed MPEG-4
images from the following:
1 sec/2 sec/3 sec/4 sec/5 sec
If errors occur frequently on the network environment in use, shorten the
refresh interval for MPEG-4 to reduce image distortion. Note, however,
that the refresh interval may be longer than the set value.
(6)
[Transmission type]
Default: Unicast port
(AUTO)
Select the transmission type of MPEG-4 images.
When "Unicast" is selected, up to eight users can access a single camera
simultaneously.
When "Multicast" is selected, any number of users can access a single
camera simultaneously.
Unicast port
(AUTO)
When MPEG-4 images are transmitted by Unicast transmission, the port
number to be used is automatically assigned.
................................................................................................................
Note
• When it is unnecessary to fix the port number from which to transmit
MPEG-4 images, for example, when using the camera on a network,
we recommend selecting "Unicast port (AUTO)".
.....................................................................................................................
Unicast port
(MANUAL)
Select this item when MPEG-4 images are transmitted by Unicast
transmission manually.
Select the port number to be used.
................................................................................................................
Note
• When transmitting MPEG-4 images via Internet, it is necessary to set
the verified port number on a broadband router. For further
information, refer to the Operating Instructions for the broadband
router in use.
.....................................................................................................................
Multicast
When transmitting MPEG-4 images by multicast transmission, enter
[Multicast address], [Multicast port] and [Multicast TTL].
(7)
[Unicast port]
*1
Default: 32004
Enter the unicast port number (used to transmit images from the camera).
Available port numbers: 1024 to 50000 (even numbers only)
(8)
[Multicast address]
*2
Default: 239.192.0.20
Enter the multicast address.
Images will be transmitted to the designated multicast address.
Available addresses: 224.0.0.0 to 239.255.255.255
(2/3)
No.
Item
Description