12
Setting the NTP server [NTP]
Click the [NTP] tab on the "Basic setup" page.
Settings relating to the NTP server, such as NTP server address and port number, can be configured on this
page.
No.
Item
Description
(1)
[Time adjustment]
Default: Manual setup
Select whether time should be adjusted manually or synchronized with
the NTP server.
Manual setup
The time set on the [Basic] tab on the "Basic setup" page will be used as
the standard time of the camera.
Synchronization
with NTP server
The time automatically adjusted by synchronizing with the NTP server will
be used as the standard time of the camera.
(2)
[NTP server address]*
Default: None (blank)
Enter the IP address or host name of the NTP server.
Number of characters for the NTP server address: 1 to 128
Important
• When entering the host name for [NTP server address], it is
necessary to configure the DNS settings on the [Network] tab of the
"Network setup" page. (
• Enter the domain name using alphanumeric characters.
(3)
[NTP port]*
Default: 123
Enter a port number to be used for the NTP server.
Available port number: 1 to 65535
(4)
[Synchronization
interval]*
Default: 1 hour
Select an interval (1 - 24 hours: in 1 hour intervals) of synchronization
with the NTP server.
(5)
[Time zone]*
Default: (GMT)
Greenwich Mean Time :
Dublin, Edinburgh,
Lisbon, London
Select a time zone corresponding to the location where the camera is in
use.
*
Set these items when [Time adjustment] is set to "Synchronization with NTP server".
(1)
(2)
(3)
(4)
(5)
