29
Setting back focus (back focus setup screen)
Click the [SETUP>>] button for "Back Focus" on the [Image/ABF] tab. (
The following describes how to configure the back focus settings.
Important
• When the settings of the [Adjusting method] and [Lens temperature compensation] have been changed,
be sure to click the [SET] button.
No.
Item
Description
(1)
[Auto back focus]
Select this item to automatically adjust the back focus of a subject in the
centre area of the screen.
[Execute] button
Click this button to activate the ABF function.
(2)
[Focus] buttons
Click these buttons to fine-adjust the focus.
Click the [RESET] button to reset the focus to the default.
[NEAR] button
Click this button to adjust the back focus towards the near side.
[RESET] button
Click this button to return the back focus position to its default.
[FAR] button
Click this button to adjust the back focus towards the far side.
(3)
[Adjusting method]
Default: AUTO
Select the back focus settings.
AUTO
When switching between the colour mode and the black and white mode,
the back focus is automatically adjusted and focus deviation is corrected.
PRESET
When switching between the colour mode and the black and white mode,
the focus shifts to the preset back focus positions set for each image
mode. The last back focus positions that were set for the colour mode and
black and white mode are automatically stored to memory as the preset
positions.
FIX
The position after adjustment of the back focus by ABF (automatic back
focus) or manually by "Focus" is fixed.
(4)
[Lens temperature
compensation]
Default: ON
Select whether or not to automatically compensate focus by using
changes in temperature. This setting should normally be left at "ON".
ON
The focus is automatically compensated.
OFF
The focus is not automatically compensated.
(5)
[CLOSE] button
Click this button to close the "Back Focus" setup menu.
(1)
(2)
(3)
(4)
(5)
