16
Configure the Settings Relating to Images
Settings relating to JPEG/MPEG-4 images, camera function, image quality and ABF can be configured on the
"Camera setup" page.
The "Camera setup" page has three tabs: the [JPEG/MPEG-4] tab, the [Cam Function] tab, and [Image/ABF]
tab.
Setting JPEG images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the "Camera setup" page.
Settings relating to the refresh interval of JPEG images, image capture size and image quality can be
configured on this page. For further information on settings related to MPEG-4 images, see page 17.
■
JPEG setup
No.
Item
Description
(1)
[Refresh interval
(JPEG)*]
Default: 5 fps
Select an interval to refresh the displayed JPEG image from the following:
0.1 fps/0.2 fps/0.33 fps/0.5 fps/1 fps/2 fps/3 fps/5 fps/6 fps*/10 fps*/15
fps*/30 fps*
................................................................................................................
Note
• When "ON" is selected for [MPEG-4 transmission], the refresh
interval may be longer than the set value when any value with an
asterisk "*" on the right is selected depending on the network
environment in use.
.....................................................................................................................
(2)
[Image capture size]
Default: VGA
Select "QVGA" or "VGA" for the image capture size of JPEG images.
(3)
[Image quality]
Default: 5 Normal
Select the image quality of JPEG images from the following:
0 Super fine/1 Fine/2/3/4/5 Normal/6/7/8/9 Low
(1)
(2)
(3)
