44
■
E-mail destination address setup
Setting Panasonic alarm notification
[Notification]
Click the [Notification] tab on the "Alarm setup" page.
Settings relating to notification by Panasonic alarm protocol can be configured on this page.
(2/2)
No.
Item
Description
(4)
Destination address 1 to
4
Enter the destination mail address(es). Up to 4 destinations can be
registered.
Alarm
To perform e-mail notification when an alarm is detected, select the
"Alarm" check box.
Diag.
To perform notification by e-mail for the remaining space on the SD
memory card, the SD memory card has become full, or when mounting of
the SD memory card failed, select the "Diag." check box.
Destination
address
Enter the mail address of the destination mail address.
Number of characters for the mail address: 3 to 128
[DEL] button
To delete a registered address, click the [DEL] button.
(5)
[Mail subject]
Enter the subject of the e-mail.
Number of characters for the mail subject: 0 to 50
(6)
[Mail body]
Enter the body of the e-mail.
Number of characters for the mail body: 0 to 200
................................................................................................................
Note
• E-mail notification will be sent with the message "SD memory card is
full" when there is no more free space left on the SD memory card or
with the message "The SD memory card cannot be recognized."
when the SD memory card has failed to mount.
.....................................................................................................................
(2)
(3)
(4)
(1)
