Panasonic WV-NW484SE Setup Manual Download Page 68

Page: 68 / 82

Error indications relating to FTP

Error indications relating to DDNS

Category

Indication

Description

FTP server error

Connection error to DNS server

• The FTP server may be down. Consult

the network administrator.

• The IP address of the FTP server may

be incorrect. Check the IP address of

the FTP server.

Cannot connect to FTP server

Connection error

File transfer error

• The FTP server settings may be

incorrect. Check the FTP server

settings.

• The settings relating to the indicated

item may be incorrect. Check the FTP

server settings.

Passive mode error

Log out failed

Directory change failed

User name and password are not

correct

Internal error

Undefined error

An error occurred in the FTP function.

Check the FTP server settings.

Category

Indication

Description

Connection error

Cannot connect to DDNS server

• The designated IP address of the

DDNS server may be incorrect. Check

the DDNS settings.

• The DDNS server may be down.

Consult the network administrator.

User name and password are not

correct

Entered user name or password may be

incorrect. Check the DDNS server settings.

IP address update failed

IP address update error occurred in the

DDNS server. Consult the network

administrator.

Internal error

Undefined error

An error occurred in the DDNS function.

Check the DDNS server settings.

Summary of Contents for WV-NW484SE



















































































Search results

Summary of Contents for WV-NW484SE

Reviews:

Related manuals for WV-NW484SE

Brands by name

Popular brands

Panasonic WV-NW484SE, Setup Manual

Search results

Summary of Contents for WV-NW484SE

Reviews:

Related manuals for WV-NW484SE

Brands by name

Popular brands