17
Setting MPEG-4 images [JPEG/MPEG-4]
Click the [JPEG/MPEG-4] tab on the "Camera setup" page.
The settings relating to MPEG-4 images such as bit rate, image capture size and image quality can be
configured on this page. For information on settings relating to JPEG images, see page 16.
■
MPEG-4 setup
(1/3)
No.
Item
Description
(1)
[MPEG-4 transmission]
Default: ON
Select whether or not to transmit MPEG-4 images.
................................................................................................................
Note
• When "ON" is selected for [MPEG-4 transmission], both MPEG-4
images and JPEG images can be monitored. Note, however, that the
refresh interval may be longer than the set value when displaying
JPEG images.
.....................................................................................................................
ON
MPEG-4 images are transmitted.
OFF
MPEG-4 images are not transmitted.
(2)
[Max bit rate (per 1
client)*]
Default: 2048kbps*
Select an MPEG-4 bit rate per client from the following:
64kbps/128kbps*/256kbps*/512kbps*/
1024kbps*/1536kbps*/2048kbps*/3072kbps*/4096kbps*
................................................................................................................
Note
• The MPEG-4 bit rate is synchronized with the [Total bit rate] set on
the "Network setup" page. (
For this reason, the bit rate may be lower than the set value when any
value with an asterisk "*" on the right is selected depending on the
network environment in use.
.....................................................................................................................
(3)
[Image capture size]
Default: VGA
Select "QVGA" or "VGA" for the image capture size of MPEG-4 images.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
