![background image](http://html1.mh-extra.com/html/panasonic/wv-nw484se/wv-nw484se_setup-manual_4256447024.webp)
24
(8)
[Wait time]
Default: 30 sec
Select the interval before switching between the colour mode and black &
white mode from the following:
10 sec/30 sec/1 min/5 min
(9)
[White balance]
Default: ATW1
Select the white balance adjustment method from the following.
White colour can be adjusted by [Red Gain] and [Blue Gain].
................................................................................................................
Note
• Under the following conditions, colour may not be faithfully
processed. In such cases, use the AWC white balance mode.
• When capturing a subject, the majority of which is a dense colour
• When the light source is clear blue sky or the setting sun
• When capturing a subject whose luminance is too low
• After selecting "AWC", click the [ADJUST] button. It will take around 7
seconds to complete the white balance adjustment.
.....................................................................................................................
ATW1
Sets the auto tracking white balance mode. In this mode, the camera
continually monitors the colour temperature of the light source and
automatically adjusts white balance.
In this mode, the supported colour temperature range is approximately
2,700 K to 6,000 K.
ATW2
Sets the auto tracking white balance under a sodium lamp mode. The
camera will automatically adjust to the optimum white balance mode.
In this mode, the supported colour temperature range is approximately
2,000 K to 6,000 K.
AWC
Sets the auto white balance control mode. This mode is best in locations
where the light source is constant.
In this mode, the supported colour temperature range is approximately
2,000 K to 10000 K.
(10)
[Red Gain]
Select this item to adjust the red colour of images.
When the cursor is moved in the "+" direction, the red colour will become
denser. When it is moved in the "-" direction, the red colour will become
less dense.
Click the [RESET] button to reset the colour to the default.
(11)
[Blue Gain]
Select this item to adjust the blue colour of images.
When the cursor is moved in the "+" direction, the blue colour will become
denser. When it is moved in the "-" direction, the blue colour will become
less dense.
Click the [RESET] button to reset the colour to the default.
(12)
[DNR] (Digital Noise
Reduction)
Default: HIGH
When this function is active, noise is automatically reduced under low
lighting.
HIGH
High DNR, afterimage remains
LOW
Low DNR, reduces afterimage
(3/4)
No.
Item
Description