Briefed with the idea of “The Super intelligent Design Concept” Sanji engineers developed the ZX Range of
vehicle security alarm systems. The ZX range
professional
represents the 'state of the art' in vehicle
security. Read these instructions for correct system operation. All points marked are optional features.
*
5) ALARM ARMED
CONFIRMATION
Press the lock button, the indicators
will flash once to confirm that the
alarm is fully set.
6) SENSOR SHUT
DOWN
Press both buttons together when
setting the alarm. The siren will sound
4 chirps and the indicators will flash
twice. The sensor has now been
disabled. After 20 seconds the system
will be fully armed, however the sensor
will be disabled.
1) SETTING THE
ALARM
Press the lock button, the unit will
sound 2 soft chirps and the indicators
will flash twice. If fitted with central
locking the doors will lock and the
sensor will switch on.
7) RESETTING
THE ALARM
Press the unlock button. The unit
will sound 1 soft chirp and the
indicators will flash once. If fitted
with central locking the doors will
unlock.
2) DOOR / BOOT /
BONNET OPEN
WARNING
The unit will sound two additional loud
chirps and flash the indicators twice
when setting the alarm. If a door is still
open when the unit fully arms, the
doors will be bypassed. The system will
assume a faulty door switch.
3) ALARM DELAY
PERIOD
The sensor led will flash rapidly during
the 20 second delay period. After the
delay, the sensor led will go on solid.
The alarm is now fully armed.
sensor led
flashing
rapidly
4) ALARM FAST
ARM
After the alarm has been set press the
lock button again. The unit will now go
to fully armed and the sensor led will
turn on solid.
sensor led
flashing
rapidly
sensor led
on solid
ZX70CL USER INSTRUCTIONS
9) AUTO ZONE
BYPASS
If the unit detects a permanently faulty
zone, e.g. door or sensor during alarm
set, the system will sound 3 times then
isolate the faulty zone.
8) SELECTIVE
UNLOCK ON
ALARM
RESET
Press the unlock button. The unit will
reset and selectively only open the
driver’s door. To open the passenger
doors press the unlock button again.
*
10) VIOLATION
CHIRPS
When the alarm is reset, the unit will
sound 4 loud chirps if the alarm had
triggered during the alarm set mode.
11) DOOR LOCK
ON START
When the ignition is turned on, if all the
doors, boot and bonnet are closed, the
doors will lock.
*
12) DOOR LOCK
/ UNLOCK
IN DRIVE
Press the unlock button to unlock the
doors. Press the lock button to lock the
doors.
UNLOCK
LOCK
13) DOOR
UNLOCK
ON IGNITION
OFF
Switch the ignition off. All the doors
will unlock. If fitted with selective
unlock, only the driver’s door will open.
Press the unlock button to open the
passenger doors.
*
14) REMOTE LOW
BATTERY
WARNING
The remote led will normally be on solid
when pressing any button. If the remote
batteries are low the led on your
remote control will flash. Replace the
batteries with: 2 x CR1220 lithium
batteries.
ZX70CL_USER_REV2
