Panasonic Workio DP-3510, Service Manual

Page: 385 / 858

385
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
(2) Install the Guide Plate (Long) and secure it with
3 Screws.
Removing the Punch Fixing Plate
(1) Remove the 2 Screws from the Punch Fixing
Plates found on the Punch Unit; then, detach the
Punch Fixing Plates (both front and rear).
Note:
It is a good idea to store the removed Punch Fixing
Plate and shipping Screws for future use.
Connecting to the Finisher
(1) Make sure that the copier is unplugged and
Finisher is disconnected.
(2) Install the Stepped Mounting Screws as
illustrated.
(3) Remove the 4 Screws as illustrated, and detach
the Connector Cover 1 and Connector Cover 2.
(2)
Guide Plate (Long)
Punch
Fixing Plate
(1)
Stepped Mounting Screws
(3)
(3)
Connector Cover 2 Connector Cover 1
Finisher Side