Panasonic Workio DP-3510, Service Manual

Page: 662 / 858

662
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.7.3.3. Puncher Unit (option)
1. E7-28 (Faulty Punch Motor)
2. E7-29 (Faulty Horizontal Registration Motor)
Cause Checks
Yes
/ No
Action
Punch Motor Clock
Sensor (PI2P) Check the punch motor clock sensor. Is
the sensor normal? No Replace the sensor.
Punch Home Position
Sensor (PI3P) Check the punch home position sensor.
Is the sensor normal? No Replace the sensor.
Wiring Is the wiring between the punch home
position sensor and the Finisher
Controller PCB normal? No Correct the wiring.
Punch Mechanism Is there any trouble with the punch
mechanism? Yes Correct the punch
mechanism.
Punch Motor (M1P) No Replace the punch motor.
Punch Driver PCB Replace the punch driver PCB. Is the
problem corrected? No Replace the Finisher
Controller PCB.
Yes End.
Cause Checks
Yes
/ No
Action
Horizontal
Registration Home
Position Sensor
(PI1P) Check the horizontal registration home
position sensor. Is the sensor normal? No Replace the sensor.
Wiring Is the wiring between the horizontal
registration home position sensor and
the Finisher Controller PCB normal? No Correct the wiring.
Horizontal
Registration
Mechanism Is there any problem with the horizontal
registration mechanism? Yes Correct the horizontal
registration mechanism.
Horizontal
Registration Motor
(M2P) No Replace the horizontal
registration motor.
Punch Driver PCB Replace the punch driver PCB. Is the
problem corrected? No Replace the Finisher
Controller PCB.
Yes End.