Panasonic Workio DP-3510, Service Manual

Page: 389 / 858

389
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
2. Unpacking
Note:
This finisher is protected with packing materials
such as tapes and spacers against vibration and
shocks caused during transportation. Be sure to
remove them before using the finisher.
Caution:
The finisher weights approximately 35 lb (16 kg).
To prevent injuries, use the appropriate number of
personnel and the proper equipment to lift or move
the finisher.
Move the finisher next to the left side of the
machine and remove the packing materials using
the following procedure.
(1) Take the Stapler, Finisher, and accessories out of
the package.
(2) Remove the tapes securing the Stapler, Finisher,
Accessory Cover, etc. along with the packing
materials.
Note:
The removed tapes and packing materials will be
needed when transporting the finisher for
relocation or repair; it is a good idea to store them
away for future use.
3. Preparing the Host Machine for Installation
Note:
For USA and Canada, skip to step (15).
(1) Open the Front Door.
(2) Open the Upper Exit Cover.
(3) Remove 3 Screws.
(4) Remove the Exit Guide 3 Assembly.
If the Exit Guide 3 Assembly has the Rollers (7),
follow steps (5) ~ (7) to remove.
[If not, skip to step (8)]
(5) Remove 2 Stopper Plates.
(6) Remove 2 Shafts.
(7) Remove 2 Rollers.
(2)
(4)
(3)
(5)
(6)
(6)
(7)
(7)
(5)