Panasonic Workio DP-3510, Service Manual

Page: 522 / 858

522
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.2.2.5. Staple Operation
1. Outline
The Stapler Unit staples a stack of as many sheets as specified.
The stapling position differs according to the selected staple mode and paper size. The Stapler Unit is
checked by the Stapler Shift Home Position Sensor (PI7) to find out whether it is at the home position.
When starting operation after power-on, the Finisher Controller PCB drives the Stapler Shift Motor (M4)
to return the Stapler Unit to the home position. If the Stapler is already at the home position, then (M4)
is not turned on.
Fig. 2-031
Fig. 2-032
Sheets
Stapler Shift Home
Position Sensor (PI7)
Stapler
Stapler Shift Motor (M4)
Front diagonal stapling 2-point stapling
Rear diagonal stapling
Rear 1-point stapling
Paper
width/2