Panasonic Workio DP-3510, Service Manual

Page: 593 / 858

593
JAN 2006 Ver. 5.2
DP-3510/3520/3530/4510/4520/4530/6010/6020/6030
11.1.5. Mechanical Construction
11.1.5.1. Finisher Unit
This chapter describes the mechanical features, operations, disassembly and reassembly procedures.
Be sure to observe the following points when disassembling and reassembling the Machine:
1. Before disassembling or reassembling, be sure to unplug the Power Plug from the wall outlet.
2. Reassemble parts in reverse order, unless otherwise indicated.
3. Reassemble Screws to their original locations, ensuring their correct length and diameter.
4. As a rule, do not operate the Machine with any parts removed.
11.1.5.1.1. External Components
1. Removing of the Front Door Assembly.
Fig. 5-001
Figures in parentheses ( ) indicate the number of
mounting Screws.
Fig. 5-002
(1) Open the Front Door Assembly [1].
(2) Remove the Screw [2], and remove the Bushing
[3] (center).
(3) Remove the Screw [4], and remove the Bushing
(top) [5]. Then, remove the Front Door Assembly.
Tray [1]
[3]
Front
Door
[2] Rear
Cover (3)
[4] Upper Door Assembly
[4]
[5]
[1]
[3]
[2]