Panasonic WJND200 - NETWORK DISK RECORDER Setup Instructions Download

Page: 13 / 85

Screenshot 3

The top page will be displayed.

Step 3

Click the buttons or the tabs for operations.

Important:

If a message is displayed on the information bar,
see page 83.

Notes:

• When the top page is displayed for the first time, the

install wizard of the ActiveX control required to dis-
play images from the camera will be displayed.
Follow the instructions of the wizard.

• When the install wizard is displayed again even after

completing the installation of the ActiveX, restart the
PC.

Important:

When the unit is being operated without changing
the default administrator name and password, the
pop-up window saying that it is recommended to
change the password will be displayed.

Summary of Contents for WJND200 - NETWORK DISK RECORDER






















































































Search results

Summary of Contents for WJND200 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND200 - NETWORK DISK RECORDER

Brands by name

Popular brands

Panasonic WJND200 - NETWORK DISK RECORDER, Setup Instructions

Search results

Summary of Contents for WJND200 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND200 - NETWORK DISK RECORDER

Brands by name

Popular brands