61
Settings for the FTP server [FTP Setup]
Settings for transmitting images from a camera connected to this unit to a designated FTP server periodically can be
performed with the "FTP Setup" menu.
Screenshot 1
Click the [Comm] button in the "Setup" panel and then
click the "FTP Setup" tab. The "FTP Setup" page will be
displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Setup items
■
FTP Server Address
Enter an address or name of the FTP server as a desti-
nation of images. To enter an FTP server name, it is
necessary to select "MANUAL" or "AUTO" for "DNS".
Enter up to 255 alphanumeric characters including
hyphens (-) and periods (.).
■
User Name
Enter a user name (login name) to access the FTP serv-
er. Enter up to 32 alphanumeric characters. The avail-
able characters are the characters listed below except
(&) and blank (space).
■
User Password
It is necessary to register a password when sending
images to the FTP server. Enter up to 32 alphanumeric
characters listed on the next page.
An entered character for the password will be displayed
as "*" or "•".
■
Mode
Select a mode for sending images to the FTP server.
Change to "PASSIVE" when sending images is difficult
with "ACTIVE".
Default:
ACTIVE
[FTP Send by Periodic Timer]
Perform the following settings to periodically transmit
live images. Perform the settings to determine whether
or not to transmit live images to the FTP server using
the timetable (
☞
page 45).
■
Server Directory
Enter a directory of the server. Enter up to 255 alphanu-
meric characters. The available characters are the char-
acters listed on the next page except (&*:<>?\ | ~ blank
(space)).
■
File Name
Perform the settings for the rules about the file name to
be sent.
Select whether to "TIME & DATE BASE" or "SERIAL
NUMBER".
Default:
TIME & DATE BASE
■
Interval
Enter a number for transmission interval. Enter a num-
ber (1 - 1440) for transmission interval, and select
whether it will be "s" (seconds) or "m" (minutes) for the
interval unit.
Default:
1 s
