Panasonic WJND200 - NETWORK DISK RECORDER Setup Instructions Download | Manualshive

Page: 73 / 85

background image

73

Screenshot 1

Click the [Maintenance] button on the "Setup" panel and
then click the "Network Information" tab. The "Network
Information" page will be displayed.

Step 1

The IP addresses of the cameras connecting to this
unit, line speed of this unit and users currently being
logged in this unit will be displayed.

Confirmation of the available hard disk space [Disk Information]

The disk size of the HDDs, status of write protection, the available capacity of the HDDs, and the hour meter will be
displayed. It is also possible to check the time range of the images recorded on the HDDs. Refer to the operating
instructions (PDF) for further information about the built-in hard disks of this unit.

Check the network status of the devices connecting to this unit [Network Information]

It is possible to check the IP addresses of the cameras connecting to this unit, line speed of this unit and users cur-
rently being logged in this unit.

Screenshot 1

Click the [Maintenance] button on the "Setup" panel and
then click the "Disk Information" tab. The "Disk
Information" page will be displayed.

Step 1

The disk size of the HDDs, status of write protection, the
available capacity of the HDDs, the hour meter, the time
range of the images recorded on the HDDs will be dis-
played.

Note:

A smaller size than the actual size of the HDDs will
be displayed since the disk space used for data
management is excluded.

«
...
71
72
73
74
75
...
»

Summary of Contents for WJND200 - NETWORK DISK RECORDER






















































































Reviews:

No comments

Related manuals for WJND200 - NETWORK DISK RECORDER

Brand: W Box Technologies Pages: 4

Brand: Dante Pages: 50

Brand: Danbit Pages: 120

Brand: XtendLan Pages: 148

Brand: Prestigio Pages: 26

Brand: Zepco Pages: 12

Brand: Partizan Pages: 82

Brand: L3 Mobile-Vision Pages: 280

Brand: Sony Pages: 10

DHG-HDD500 - Hi Definition Digital Video Recorder

Brand: Sony Pages: 1

Digital Betacam DVW-2000

Brand: Sony Pages: 8

Brand: Sony Pages: 14

Brand: Sony Pages: 160

Brand: Sony Pages: 168

Digital Betacam DVW-2000

Brand: Sony Pages: 164

DSR 45A - Professional Editing Video Cassete recorder/player

Brand: Sony Pages: 220

Brand: Sony Pages: 208

Brand: Sony Pages: 234

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands