40
Screenshot 2
The "Program Setup" window will be displayed.
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 3
Click the [SET] button after completing the settings, and
close the window by clicking the [
×
] button at the top
right of the window.
Setup items
■
Copy the Other Program Setup
When it is necessary to copy the settings of the other
program, select the desired program (source of the set-
tings) and click the [Copy] button.
■
RECORDER SETUP
Perform the settings such transmission rate of "LIVE
VIDEO" for each camera channel, and recording rate of
each recording type, etc.
[LIVE VIDEO]
Select the transmission rate of live images.
OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-Frame
When "OFF" is selected, live image transmission will not
be performed.
[MANUAL REC]
Select the recording rate for manual recording.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips/ALL/I-Frame
OFF:
Manual recording will not be performed.
[SCHEDULE REC]
Select the recording rate for schedule recording from
the following.
OFF/0.1 ips/0.2 ips/0.3 ips/0.5 ips/1 ips/2 ips/3 ips/
5 ips/10 ips/15 ips/ALL/I-Frame
OFF:
Schedule recording will not be performed.
[EVENT REC]
Performs the settings for the recording rate and record-
ing duration for pre-event recording and post-event
recording.
The following are available for "Recording Rate".
OFF/1 ips/2 ips/3 ips/5 ips/10 ips/15 ips/ALL/I-Frame
OFF:
No recording will be performed.
Important:
Depending on the timing of an event occurrence, the
recording duration of the recorded data may not be
exactly same as set recording duration for the post-
event recording.
Note:
"ALL" is unavailable for the recording rate of pre-
event recording when the compression method of
the camera is M-JPEG.
The following recording duration can be set.
• Pre-event recording (PRE-EVENT)
2 s/5 s/10 s/20 s/30 s
• Post-event recording (POST-EVENT)
2 s/5 s/10 s/20 s/30 s/1 min/2 min/3 min/5 min/
10 min
MANUAL:
Recording will be performed while alarm
signals (site alarm, terminal alarm, command
alarm) are being supplied.
CONTINUE:
Recording will not stop until the [ALM]
button is clicked.
