Panasonic WJND200 - NETWORK DISK RECORDER Setup Instructions Download

Page: 53 / 85

Settings of the sequential display of images from cameras [Sequence Setup]

Perform the settings for the sequential display of live images.

Screenshot 1

Click the [Camera] button in the "Setup" panel and then
click the "Sequence Setup" tab. The "Sequence Setup"
page will be displayed.

Step 1

Edit the settings for each item.
Refer to the following for further information about the
settings for each item.

Step 2

Click the [SET] button after completing the settings.

[The Method of Sequence]

Select "SPOT" (single screen) or "4 Screens" for "The
Method of Sequence".

Default:

SPOT

[SPOT Live Sequence]/[4 Screens Sequence]

When the [SETUP] button for the selected method is
clicked the following window will be displayed. Perform
the settings on this window. Click the [SET] button after
completing the settings, and close the window by click-
ing the [

] button at the top right of the window.

Note:

When the image compression method of the camera
selected for a camera channel is "MPEG-4", the
respective sequence step will be skipped.

[CAM]

Select a camera whose images are to be displayed at
each step from the following.

- -:

Skips the selected step.

CAM1 - 16 (when "SPOT" is selected):

Switches

images from the selected camera channel on a sin-
gle screen (SPOT), starting from "STEP1".

4A - 4D (when "4 Screens" is selected):

Switches

images of the preset camera groups (4A - 4D) of 4
channels in sequence on a 4-Screen, starting from
"STEP1".

Setup items

Summary of Contents for WJND200 - NETWORK DISK RECORDER






















































































Search results

Summary of Contents for WJND200 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND200 - NETWORK DISK RECORDER

Brands by name

Popular brands

Panasonic WJND200 - NETWORK DISK RECORDER, Setup Instructions

Search results

Summary of Contents for WJND200 - NETWORK DISK RECORDER

Reviews:

Related manuals for WJND200 - NETWORK DISK RECORDER

Brands by name

Popular brands