50
Setup items
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select a camera number and image compression
method.
Note:
When the [SET] button is clicked after changing only
the compression method, the set recording rate/
transmission rate will be automatically changed as
follows.
When changed from "MPEG-4" to "JPEG" or "M-
JPEG", they will be "1 ips".
When changed from "JPEG" or "M-JPEG" to
"MPEG-4", they will be "I-Frame".
[ADDRESS]
Enter the IP address to be given to the camera. Enter
up to 255 alphanumeric characters.
[Port Number]
Set the http port number used by the camera. A number
from 1 - 65535 is available.
[GROUP]
Select the group to which the camera is assigned (G1 -
G4).
[CAM TITLE]
Set the camera title displayed on the "Camera Select"
panel, etc. Enter up to 16 alphanumeric characters
except the following: ! $ % ' < = > @ [ \ ] ^ _ ` { | } ~
[USER ID]
Set the user ID for accessing the cameras and logging
in. Enter up to 32 alphanumeric characters.
[PASSWORD]
Set the password for accessing the cameras and log-
ging in. Enter up to 32 alphanumeric characters.
Screenshot 2
The "Network Camera Registration" window will be dis-
played.
Step 2
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 3
Click the [SET] button after completing the settings, and
close the window by clicking the [
×
] button at the top
right of the window.
