31
■
GO TO LAST before
Select a time to be skipped to when the [GO TO LAST]
button is clicked from the following.
5 s/10 s/30 s/1 min/5 min
■
Buzzer (Error)
Perform the settings for sounding a buzzer at an error
occurrence.
OFF:
A buzzer will not sound at an error occurrence.
2 s/5 s/10 s/20 s/30 s/1 min:
The buzzer that started
sounding at an error occurrence will sound for the
selected period.
EXT:
The buzzer will start sounding when a trouble
occurs and it will keep on sounding until the [ERR]
button is clicked or the [BUZZER STOP] button on
the front panel is pressed.
Perform the settings for the time and date [Time & Date]
Perform the settings for the time and date.
Screenshot 1
Click the [System] button on the "Setup" panel and then
click the "Time & Date" tab. The "Time & Date" page will
be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
■
Shutdown Time
Determine when the safe shutdown starts after a power
outage alert signal is supplied to this unit.
10 s/20 s/30 s/1 min/2 min/3 min/4 min/5 min
