background image

81

Functions that can be restricted

The following functions can be restricted according to the user levels.

Function

Description

Setup

It is possible to edit some settings on the setup menu. (It is impossi-
ble to edit the settings of [Camera], [Comm], [User Mng.] and
[Maintenance].

Camera Setup

It is possible to edit the settings of the [Camera] menu.

Comm Setup

It is possible to edit the settings of the [Comm] menu.

User Mng Setup

It is possible to edit the settings of the [User Mng.] menu.

Maintenance

It is possible to edit the settings of the [Maintenance] menu.

Camera Control

It is possible to pan/tilt the camera.

Event Log Status

It is possible to browse event logs. Refer to the Operating
Instructions (PDF).

Access Log Status

It is possible to browse event logs. Refer to the Operating
Instructions (PDF).

Error Log Status

It is possible to browse error logs. Refer to the Operating
Instructions (PDF).

Network Log Status

It is possible to browse network logs. Refer to the Operating
Instructions (PDF).

Alarm Reset

An event action can be canceled. (Refer to the Operating
Instructions (PDF).)

Alarm Suspend

An event action can be suspended. (Refer to the Operating
Instructions (PDF).)

Copy

A recorded image can be manually copied. (Refer to the Operating
Instructions (PDF).)

Manual REC Operation

Manual recording can be started and stopped.

Playback Operation

A recorded image can be played.

Note:

When checking the checkboxes of [Comm], [Camera], [User Mng.] and [Maintenance], the checkbox of [Setup]
will be checked automatically. On the contrary, even when the checkbox of [Setup] is checked, [Comm],
[Camera], [User Mng.] and [Maintenance] will not be checked.

Summary of Contents for WJ-ND300A







































































































Reviews: