64
Settings for Communication with other Devices [Comm]
Perform the network settings such as settings of the IP address of this unit and gateway address.
The following are the descriptions of how to perform the required settings for communicating with PCs.
Basic network settings [Basic Setup]
Basic network settings can be performed with this menu.
Screenshot 1
Click the [Comm] button in the setup menu (Advanced)
and then click "Basic Setup". The "Basic Setup" window
will be displayed.
Step 1
Perform the settings for each item.
Refer to the following for further information about the
settings for each item.
Step 2
Click the [SET] button after completing the settings.
Setup items
■
NW Link down detection
Select "ON" or "OFF" to enable or disable the network
line disconnection detection for the CAMERA/client PC
port on the rear of the unit.
ON:
Detects if the disconnection of the network line
connected to the CAMERA/client PC port occurs.
OFF:
Does not detect the network line disconnection.
■
NW Bandwidth Control
Select a rate for transmission to the FTP server from the
following.
Unlimited/32 kbps/64 kbps/128 kbps/256 kbps/
512 kbps/1 024 kbps/2 Mbps/5 Mbps/10 Mbps
Important:
The bandwidth will not be controlled when live
images are transmitted in MPEG-4 format.
■
Port Forwarding
Perform the settings relating to the port forwarding.
When the [SETUP] button is clicked the following win-
dow will be displayed. Perform the settings on this win-
dow. Click the [SET] button after completing the set-
tings, and close the window by clicking the [
×
] button at
the top right of the window.
