61
Setup items
[Manufacturer]
Select the manufacturer of the camera.
[MODEL/COMPRESSION]
Select the model of the camera and the image compres-
sion method.
Notes:
• When the [SETUP] button is clicked after changing
only the compression method, the set recording
rate/transmission rate will be automatically changed
as follows.
• When changed from "MPEG-4" to "JPEG" or "M-
JPEG", they will be "1 ips".
• When changed from "JPEG" or "M-JPEG" to
"MPEG-4", they will be "I-Frame".
• When the [SETUP] button is clicked after changing
the compression method and any other setting item,
the set recording rate/transmission rate will be auto-
matically changed to "OFF".
[ADDRESS]
Enter an IP address. Enter up to 255 alphanumeric
characters.
[Port Number]
Set the HTTP port number to be used for the camera. A
number from 1 - 65535 is available.
[GROUP]
Select the desired group (G1-G8) to which the camera
is to be belonged.
[CAM TITLE]
Set the camera title displayed on the [Cam Select] tab,
etc. Enter up to 16 alphanumeric characters except the
following: ! $ % ' < = > @ [ \ ] ^ _ ` { | } ~
[USER ID]
Set the user ID to be used to access and log in the cam-
era. Enter up to 32 alphanumeric characters.
[Password]
Set the password to be used to access and log in the
camera. Enter up to 32 alphanumeric characters.
[TIME ZONE]
Displays the time zone of the camera.
[CAM SETUP]
It is possible to display the camera setup menu by click-
ing the [SETUP] button of the desired camera. Refer to
the operating instructions of the camera in use for
descriptions of how to perform the camera settings.
Important:
• The camera setup menu can be displayed only
when "ON" is selected for "Port Forwarding" on the
setup menu (Advanced) ("Comm" – "Basic Setup" –
"Port Forwarding").
• Depending on the network environment, some of the
camera settings menu may not be displayed.
• Images sometimes may not be displayed on the
camera settings menu.
