Panasonic WJ-ND300A Setup Instructions Download Page 41

Page: 41 / 102

Screenshot 3

The submenus respective to the clicked button on the
setup menu (Advanced) will be displayed.

Step 3

Click the desired submenu on the setup menu
(Advanced).

Screenshot 4

The settings page of the selected submenu will be dis-
played in the image display area.

Step 4

Perform the settings for each item.
Click the [SET] button after completing the settings.
When the [CLEAR] button is clicked, the contents of the
settings will be cleared.

Step 5

To complete the settings, click the [Registration] button.

→

The settings will be applied.

Important:

• If the settings are applied, all login users will be

forcibly logged out.

• The settings will not be applied by clicking the [SET]

button in step 4 yet. To apply the settings, click the
[Registration] button on the setup menu (Advanced).

Submenu

Summary of Contents for WJ-ND300A







































































































Search results

Summary of Contents for WJ-ND300A

Reviews:

Related manuals for WJ-ND300A

Brands by name

Popular brands

Panasonic WJ-ND300A, Setup Instructions

Search results

Summary of Contents for WJ-ND300A

Reviews:

Related manuals for WJ-ND300A

Brands by name

Popular brands