Panasonic MEWNET-F, Technical Manual

Page: 17 / 168

1-9
1.3 Unit Types
1.3.1 Remote I/O System "MEWNET-F" Components
Name Specifications
I/O
allocation
Model
No.
FP2 Multi-wire
Link Unit A master station is configured with the CPU unit of FP2,
FP2SH, and controlsslave stations.
16SE
Note4)
AFP2720
Master
station FP3 Remote I/O
Master Unit
A master station is configured with the CPU unit of FP3
FP10, and controlsslave stations.
16SE
Note4)
AFP3742
FP2 Remote I/O
Slave Unit
This unit is used for decentralized allocation of I/O using
the FP2 system as a slave station. It is controlled by the
master unit.
――― AFP2745
FP3 Remote I/O
Slave Unit
This unit is used for decentralized allocation of I/O using
the FP3 system as a slave station. It is controlled by the
master unit.
――― AFP3745
12 V DC input/
0.2 A Tr output 16-point input, 16-point
output
16X16Y AFP87445
FP I/O terminal
baord
[MIL connector
type]
Note1)
24 V DC input/
0.2 A Tr output 16-point input, 16-point
output
16X16Y AFP87446
24 V DC input/
0.2 A Tr output 16-point input, 16-point
output
16X16Y AFP87444 FP I/O terminal
board [Terminal
block type]
24 V DC input/
2 A Ry. output 16-point input, 8-point
output
16X16Y AFP87432
8-point
input
16X AFP87421
Input unit
24 V DC input
16-point
input
16X AFP87422
8-point
output
16Y AFP87423
FP I/O
Terminal
Unit
(Basic)
Output unit
0.5 A Tr. output
16-point
output
16Y AFP87424
8-point
input
16X AFP87425
Input unit
24 V DC input
16-point
input
16X AFP87426
8-point
output
16Y AFP87427
FP I/O Terminal
Unit
Controlled as
a slave
station. Up to
32 points can
be added.
(Operating
voltage: 24 V
DC)
FP I/O
Terminal
Expansion
Unit
Note2)
Output unit
0.5 A Tr. output
16-point
output
16Y AFP87428
Power supply voltage: 24 V
DC
32X32Y AFP1732
FP1 I/O Link Unit
Combined with FP1, and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
FP10SH).
Note3)
Power supply voltage: 100 V
AC to 240 V AC
32X32Y AFP1736
Slave station
FP0 I/O Link Unit
Combined with FP0 and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
FP10SH).
Power supply voltage: 24 V
DC
32X32Y AFP0732
Power supply voltage: 12 V
DC
32X32Y AFC1731
FP-M I/O link
board
Combined with FP-M, and
exchanges contact
information with the master
station (FP2, FP2SH, FP3,
FP10SH).
Power supply voltage: 24 V
DC
32X32Y AFC1732
Note1) Power supply cable (1 m in length) APL9511 x 1 pc is supplied.
Note2) PL Mark II expansion cable (8 cm in length) APL2510 x 1 pc is supplied.
Note3) FP1 expansion cable (7 cm in length) AFP1510 x 1 pc is supplied.
Note4) When using the editing software FPWIN GR, the number of occupied I/O points can be set to 0
(0SE).