- 21 -
Parameter Setting
Setting
Operation Panel
*
Normally in the monitor mode, the operation panel displays frequency (Hz).
*
The indicated value is just for reference. Do not use this device as a measuring instrument.
Also, the operation panel can display the magnification factor specified by [
Display scale
factor].
5-digit LED
Displays an output frequency, set frequency, value magnified by the scale factor,
cause of error and parameter value.
2-digit LED
Display a parameter number. In the monitor mode, the direction of motor rotation
is displayed.
MODE switch
Used to change the monitor mode. Pressing this switch changes the monitor as
follows:
Output frequency
Converter voltage
Motor current
Used to switch between the parameter No. mode and the parameter value mode,
and to register a parameter value.
DATA SET switch
●
Description on each mode
△
▽
switch
Use to select, set and modify a parameter.
Can be held down for continuous changing.
RUN switch
Issues the run command.
STOP switch
Issues the stop command.
r/min
Hz
Ａ
Ｖ
ＳＴＯＰ
ＤＡＴＡ
ＳＥＴ
ＲＵＮ
ＭＯＤＥ
^^
5-digit LED
2-digit LED
*
Panasonic
Panasonic
Panasonic
Panasonic
Monitor mode
Displays an output frequency, converter voltage and motor current.
At power-ON, the operation panel is set to this mode.
If the MODE switch is pressed in the parameter No. mode or
parameter value mode, the display will be changed to this mode.
Parameter No.
mode
A parameter number (
-
)
) blinks. If the DATA SET switch
is pressed in the monitor mode, the display will be changed to this
mode.
Parameter
value mode
A parameter set value blinks. The set value can be changed with
the
△
or
▽
button.
Pressing the DATA SET switch after changing a set value
registers the updated value. Even if the MODE switch is
pressed, the data will not be registered.
