- -
66
Detailed Parameter Description
Operation panel
Step
Switch
Display on LED
Remarks
⑤
Select
[
]
Press
▽
.
Press
DATA SET
.
⑥
Select
partial lock
Press
△
.
Press
DATA SET
.
•
Changes stored
⑦
Trip reset
Press
△
and
▽
simultaneously.
•
Monitor mode
When selecting more than one parameter, repeat steps
③
and
④
before proceeding to step
⑤
.
●
Canceling parameter lock
If a parameter is erroneously locked, cancel the parameter lock according to the following procedure.
1) Turn OFF the power supply, and make sure that the LED display turns off. Then, turn ON the
power supply while pressing the MODE key.
2) Call [Parameter lock], and change it to
.
3) Turn OFF the power supply, and make sure that the LED display turns off. Then, turn ON the
power supply.