Panasonic M2X Series, Instruction Manual

Page: 43 / 76

- -
43
Parameter setting
No. Parameter name
Adjustment range Min. unit Factory setting Check
∗ 1
Trip cause clear
Trip cause
①
－ － －
Trip cause ②
－ － －
Trip cause
③
－ － －
Trip cause ④
－ － －
Trip cause
⑤
－ － －
Parameter initialization
Motor selection
Motor capacity
∗
2
Number of motor poles
4-pole inverter
capacity
∗
3
Starting frequency
0.5 - 10Hz 0.01Hz
1Hz
Automatic voltage
adjustment reference
voltage
380, 400, 440, 460V 400V
Automatic voltage
adjustment selection
Enables automatic voltage adjustment
－
Disables automatic voltage adjustment
－
Disables automatic voltage adjustment
during deceleration only
Parameter lock
Parameters are not locked
All parameters are locked
Locks unnecessary parameter
Copy parameter
Parameters not copied
Parameters are read out to panel
Parameters are written into inverter
Panel data is initialized
Motor rated current
0 - 100A 0.01
※
∗ 4
Motor no-load current
0 - 100A 0.01
※
∗ 4
Motor primary resistance
0 – 100
Ω
0.01
※
∗ 4
Slip correction gain
0, 1, 2, 3, 4, 5, 6, 7
4
Slip correction response time
0, 1, 2, 3, 4, 5, 6, 7
0
∗
1 Parameters marked by in the Check column are tripped for safety if modified or memorized.
Cancel the trip before use.
∗
2 The motor capacity is defined as follows: : 0.4 kW, : 0.75 kW, : 1.5 kW, : 2.2 kW,
: 3.7 kW, : 5.5 kW, : 7.5 kW.
∗
3 The 4-pole motor with the same capacity as the inverter’s rating has been specified as the default
setting.
∗
4 The parameter settings marked with asterisk (
※
) vary depending on the capacity. They will be restored
to the default settings through initialization.