Panasonic M24PWR, Operation Manual

Page: 155 / 235

155
4.7.9.a. IEEE 802.1X Port Based Access Control
Configuration
On the 802.1X Access Control Configuration Menu screen, pressing "p"
opens the Port Based Access control Configuration Menu as shown in Fig.
4-7-44. On this screen, you can configure the IEEE 802.1X port based access
control.
The supported authentication methods are EAP-MD5, TLS, and PEAP.
Fig. 4-7-44 IEEE 802.1X Port Based Access Control Configuration
Screen Description
NAS ID Displays the access ID (NAS Identifier).
Port No Displays the port number.
Port Control Displays the operation mode for authentication requests.
Auto
The access control function is enabled. The
authentication process relay is performed
between the client and authentication server.
Force
Unauthorized The access control function is disabled. All
authentication requests from clients are ignored.
Force Authorized The access control function is disabled. The port is
made accessible without authentication. (Factory
default setting)
Port Status Displays the authentication status. reflecting the Port Control setting
shown below.
Unauthorized
Indicates that the ID is not authorized.
Authorized Indicates that the ID is authorized.
PN23249K/PN23249A Local Management System
Advanced Switch Configuration -> Port Based Access Control Configuration Menu
NAS ID: Nas1 Port No: 1 Port Control : Force Authorized
Port Status : Authorized Authorized MAC Address: --:--:--:--:--:--
Operational Control Direction : Both
Administrative Control Direction: Both
Per Port Re-auth : Disabled
Current PVID : 1 Dynamic VLAN : Disabled
Guest Access Mode : Both
Transmit Period : 30 seconds Max Request : 2
Supplicant Timeout : 30 seconds Quiet Period : 60 seconds
Serv Timeout : 30 seconds Re-auth Period : 3600 seconds
Guest VLAN ID : ---- Default VLAN ID : ----
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [T]ransmission Period R[e]-auth Period
Pre[v]ious Page Q[u]iet Period Re-[a]uth Status
[P]ort No Ma[x]imum Request Initiali[z]e
Port Auth [M]ode Server Time[o]ut [R]e-auth Initialize
Port [C]ontrol Supp[l]icant Timeout Delete Aut[h] MAC
Port Ctrl [D]irection Gue[s]t Access Mode Force Auth MAC T[i]meout
Num[b]er of Supplicant [G]uest VLAN ID [Q]uit to previous menu
De[f]ault VLAN ID D[y]namic VLAN Status
Command>
Enter the character in square brackets to select option