Panasonic M24PWR, Operation Manual

Page: 159 / 235

159
4.7.9.b. MAC Based Access Control Configuration
On the 802.1x Port Base Access Control Configuration screen, pressing "M"
changes the command prompt to "Select the Port based or MAC based auth
mode (P/M) >." Pressing "M" opens the MAC Based Access Control
Configuration Menu as shown in Fig. 4-7-45. On this screen, you can
configure the MAC-based access control. The supported authentication
methods are EAP-MD5, TLS, and PEAP.
Fig. 4-7-45 MAC Based Access Control Configuration
Screen Description
NAS ID Displays the access ID (NAS Identifier).
Port No Displays the port number.
Number of
Supplicant Displays the number of supplicants that can be authenticated by the
port. The factory default setting is 512.
Operational
Control
Direction Displays the operation status of controlled direction by IEEE 802.1X
function.
Both Unless the client is authenticated, this Switching Hub does not
send or receive packets from the port.
In Unless the client is authenticated, this Switching Hub does not
receive packets from the port.
Administrative
Control
Direction Displays the administrative status of controlled direction by IEEE 802.1X
function.
Both Unless the client is authenticated, this Switching Hub does not
send or receive packets from the port.
In Unless the client is authenticated, this Switching Hub does not
receive packets from the port.
PN23249K/PN23249A Local Management System
Advanced Switch Configuration -> MAC Based Access Control Configuration Menu
NAS ID: Nas1 Port No: 1 Number of Supplicant: 512
Operational Control Direction: Both Administrative Control Direction: Both
Transmit Period: 30 sec Max Request : 2 Supplicant Timeout: 30 sec
Quiet Period : 60 sec Serv Timeout: 30 sec Re-auth Period: 3600 sec
Force Auth MAC Timeout: 3600 sec Per Port Re-auth: Disabled
Supplicant MAC Addr Type MAC Control Auth Status Re-auth
------------------- ------- ------------------ ------------ --------
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page [T]ransmission Period R[e]-auth Period
Pre[v]ious Page Q[u]iet Period Re-[a]uth Status
[P]ort No Ma[x]imum Request Initiali[z]e
Port Auth [M]ode Server Time[o]ut [R]e-auth Initialize
Port [C]ontrol Supp[l]icant Timeout Delete Aut[h] MAC
Port Ctrl [D]irection Gue[s]t Access Mode Force Auth MAC T[i]meout
Num[b]er of Supplicant [G]uest VLAN ID [Q]uit to previous menu
De[f]ault VLAN ID D[y]namic VLAN Status
Command>
Enter the character in square brackets to select option