Panasonic M24PWR, Operation Manual

Page: 189 / 235

189
4.7.11.b. PoE Global Configuration
On the Power Over Ethernet Configuration Menu, pressing "G" opens the
PoE Global Configuration Menu as shown in Fig. 4-7-60. On this screen, you
can configure PoE for the entire Switching Hub.
Fig. 4-7-60 PoE Global Configuration
Screen Description
Power budget: Displays the maximum amount of power this Switching Hub can
supply.
Power
Consumption: Displays the amount of power supplied by this Switching Hub.
Power usage
threshold for
sending trap Displays the power supply threshold for sending a trap.
Power
Management
Method Displays the power supply management method.
The factory default setting is "Deny next port connection."
Available commands are listed below.
U Set the threshold for sending a trap.
Press "U." The command prompt changes to "Enter power usage threshold>."
Enter the threshold for sending a trap. When you complete the setting change,
the display on the screen is automatically updated.
M Set the power supply management method.
PN23249K/PN23249A Local Management System
Power Over Ethernet Configuration -> PoE Global Configuration Menu
Power Budget : 175W
Power Consumption : 0W
Power Usage Threshold For Sending Trap: 50 %
Power Management Method : Deny next port connection, regardless of priority
-------------------------------- <COMMAND> -----------------------------------
Set Power [U]sage
Set Power [M]anagement Method
[Q]uit to previous menu
Command>
Enter the character in square brackets to select option