Panasonic M24PWR, Operation Manual

Page: 202 / 235

202
On this screen, you can display two types of counter values: Values
accumulated after booting this Switching Hub or rebooting it by power-off/
resetting (Fig. 4-8-1), and values accumulated after resetting the counters
using a command (Fig. 4-8-2). The values accumulated after booting the
Switching Hub are retained even after you reset the counter values using a
command. The counter value is automatically updated in about 10 seconds.
Fig. 4-8-2 Display of values accumulated after resetting the counters
PN23249K/PN23249A Local Management System
Main Menu -> Statistics Menu
Port: 1 Refresh: 300 Sec. Elapsed Time Since System Reset: 000:00:00:00
<Counter Name> <Total> <Avg./s>
Total RX Bytes 0 0
Total RX Pkts 0 0
Good Broadcast 0 0
Good Multicast 0 0
CRC/Align Errors 0 0
Undersize Pkts 0 0
Oversize Pkts 0 0
Fragments 0 0
Jabbers 0 0
Collisions 0 0
64-Byte Pkts 0 0
65-127 Pkts 0 0
128-255 Pkts 0 0
256-511 Pkts 0 0
512-1023 Pkts 0 0
Over 1024 Pkts 0 0
-------------------------------- <COMMAND> -----------------------------------
[N]ext [P]revious [S]elect Port Re[f]resh Mode Since [R]eset [Q]uit
Command>
Enter the character in square brackets to select option