151
Press "S" to change the command prompt to "Enter port number e.g.: 1, 3,
5-26>." Enter a port number to designate. Then, the command prompt changes
to "Enable or Disable Status (E/D)>." Press "E" to enable bandwidth control
configuration, and press "D" to disable it.
Q Return to the previous menu.
4
4
.
.
7
7
.
.
8
8
.
.
S
S
t
t
o
o
r
r
m
m
C
C
o
o
n
n
t
t
r
r
o
o
l
l
C
C
o
o
n
n
f
f
i
i
g
g
u
u
r
r
a
a
t
t
i
i
o
o
n
n
M
M
e
e
n
n
u
u
On the Advanced Switch Configuration Menu, pressing "o" opens the Storm
Control Configuration Menu, as shown in Fig. 4-7-42. You can configure the
storm control of unknown unicast, broadcast, and multicast.
Fig. 4-7-42 Storm Control Configuration
Screen Description
DLF:
Enables/disables the unknown unicast storm control.
Enabled
The unknown unicast storm control is enabled.
Disabled
The unknown unicast storm control is disabled. (Factory
default setting)
Broadcast:
Enables/disables the broadcast storm control.
Enabled
The broadcast storm control is enabled.
Disabled
The broadcast storm control is disabled. (Factory default
setting)
Multicast:
Enables/disables the multicast storm control.
Enabled
The multicast storm control is enabled.
Disabled
The multicast storm control is disabled. (Factory default
setting)
PN23249K/PN23249A Local Management System
Advanced Switch Configuration -> Storm Control Configuration Menu
Port Storm Control Setting:
No. DLF Broadcast Multicast Threshold
---- --------- --------- --------- ---------
1 Disabled Disabled Disabled 0
2 Disabled Disabled Disabled 0
3 Disabled Disabled Disabled 0
4 Disabled Disabled Disabled 0
5 Disabled Disabled Disabled 0
6 Disabled Disabled Disabled 0
7 Disabled Disabled Disabled 0
8 Disabled Disabled Disabled 0
9 Disabled Disabled Disabled 0
10 Disabled Disabled Disabled 0
-------------------------------- <COMMAND> -----------------------------------
[N]ext Page Set [B]roadcast Status [Q]uit to previous menu
[P]revious Page Set [M]ulticast Status
Set [D]LF Status Set [T]hreshold Value
Command>
Enter the character in square brackets to select option
Summary of Contents for M24PWR
