Panasonic M24PWR, Operation Manual

Page: 157 / 235

157
Operational
Control
Direction Displays the operation status of controlled direction by IEEE 802.1X
function.
Both
Unless the client is authenticated, this Switching Hub does
not send or receive packets from the port.
In Unless the client is authenticated, this Switching Hub does
not receive packets from the port.
Administrative
Control
Direction Displays the administrative status of controlled direction by IEEE
802.1X function.
Both
Unless the client is authenticated, this Switching Hub does
not send or receive packets from the port.
In Unless the client is authenticated, this Switching Hub does
not receive packets from the port.
Per Port Re-auth Displays whether the periodic re-authentication is enabled or disabled.
Enabled The periodic re-authentication is performed.
Disabled The periodic re-authentication is not performed. (Factory
default setting)
Current PVID Displays a current allocated PVID.
Dynamic VLAN Displays the dynamic VLAN operation status.
Disabled
The dynamic VLAN function is disabled.
<VLAN ID> The dynamic VLAN function is enabled, and displays the
allocated VLAN ID.
Guest Access
Mode Displays the Guest Access application conditions.
Timeout
Guest Access is applied when a Supplicant Timeout
occurs.
Auth Fail Guest Access is applied when authentication fails.
Both Guest Access is applied when either the Timeout or Auth
Fail condition is matched.
Transmit Period The number of seconds to wait before requesting the client to
reattempt authentication. The factory default setting is 30 seconds.
Max Request The maximum number of times of retransmitting an authentication
request. The factory default setting is 2 times.
Supplicant
Timeout Displays the timeout for the client. The factory default setting is 30
seconds.
Quiet Period The number of seconds to wait before reattempting a failed
authentication The factory default setting is 60 seconds.
Serv Timeout Timeout for the authentication server The factory default setting is 30
seconds.
Re-auth Period Periodic re-authentication time interval The factory default setting is
3600 seconds.
Guest VLAN ID Displays the VLAN ID applied to Guest Access. When Guest Access is
disabled, the field displays "----."
Default VLAN ID Displays the VLAN ID applied when the Port Control setting is changed
from Auto to Force Authorized or Force Unauthorized. The default
VLAN ID is also applied when VLAN information cannot be obtained
from the authentication server although the dynamic VLAN is enabled
and the authentication succeeded.