Panasonic M24PWR, Operation Manual

Page: 84 / 235

84
4.7.1.e. VLAN Port Configuration Menu
On the VLAN Management Menu, pressing "S" command opens the VLAN
Port Configuration Menu screen, as shown in Fig. 4-7-5. In this screen, you
can configure VLAN-related settings by port.
Fig. 4-7-5 VLAN Port Configuration Menu
Screen Description
Port Displays a port number.
PVID Indicates a PVID (Port VLAN ID) that has been set to the port. PVID
displays VLAN ID to which untagged packet should be transferred when
it was received. The factory default setting is 1. When tagged packet
was received, destination port is determined by referring the tag
regardless of PVID.
Acceptable
Type Indicates type of received frame.
Admit
All
Receives all frames.
Tagged
Only Receives only the tagged frames.
GVRP Indicates a status of GVRP. For all ports, ‘Disabled’ is the factory default
setting.
Enabled
GVRP is enabled.
Disabled GVRP is disabled.
PN23249K/PN23249A Local Management System
VLAN Management -> VLAN Port Configuration Menu
Port PVID Acceptable Frame Type GVRP
---- ---- --------------------- --------
1 1 Admit All Disabled
2 1 Admit All Disabled
3 1 Admit All Disabled
4 1 Admit All Disabled
5 1 Admit All Disabled
6 1 Admit All Disabled
7 1 Admit All Disabled
8 1 Admit All Disabled
-------------------------------- <COMMAND> -----------------------------------
[N]ext page Set [F]rame Type
[P]revious Page Set [G]VRP Status
Set Port [V]ID [Q]uit to previous menu
Command>
Enter the character in square brackets to select option