Panasonic M24PWR, Operation Manual

Page: 57 / 235

57
Available commands are listed below.
S Set an address of SMTP server.
Press "S." The command prompt changes to "Enter new SMTP server>." Enter an
address you wish to set.
D Set a mail address of destination.
Press "D." The command prompt changes to "Enter destination account entry
number>." Enter an address number you wish to set with a value of 1-3. Then, the
command prompt changes to "Add or Delete or Set destination account E-mail
address (A/D/M)>." Enter "A" or "M" when you wish to add or modify, or "D" when
you wish to delete.
C Display "Report Data Configuration." For details, refer to the next section (4.7.6.a).
N Set a domain name of mail address of sender.
Press "N." The command prompt changes to "Enter domain name>." Enter a domain
name you wish to set.
R Add a destination to which a report is sent.
Press "R." The command prompt changes to "Enter report destination entry
number>." Enter an account number you wish to set to destination to which a
report is sent with a value of 1-3.
E Delete a destination to which a report is sent.
Press "E." The command prompt changes to "Enter report destination entry
number>." Enter an account number you wish to release the setting with a value of
1-3.
T Add a destination to which a trap is sent.
Press "T." The command prompt changes to "Enter trap destination entry number>."
Enter an account number you wish to set to destination to which a trap is sent with
a value of 1-3.
P Delete a destination to which a trap is sent.
Press "P." The command prompt changes to "Enter trap destination entry
number>." Enter an account number you wish to release the setting with a value of
1-3.
Q Return to the previous menu.