Panasonic KX-TD816E, Installation Manual

Page: 250 / 600

S
3 Features
3-130 Features
Received call: shows <I> that indicates ‘Incoming.’ If
the call is carried by an ISDN network, also shows the
name or telephone number of the calling party.
Private call: shows <Private>.
(6) ANS: shows the ring duration of the incoming call in
Minutes / Seconds.
(7) Duration: shows the duration of the call in Hours /
Minutes / Seconds.
(8) Cost: shows the amount of charged fee; Pulse or Pounds.
(9) Acc (Account Code): shows the account code appended
to the call.
(10) CD (Condition Code): shows call handling type with the
following codes:
TR: Transfer
FW: Call Forwarding to CO Line
RM: Remote access to a modem*
RC: Received an incoming call
AN: Answered an incoming call
NA: Unanswered an incoming call
Conditions
• Connect a printer provided with an EIA (RS-232C) interface to the EIA
(RS-232C) connector located on the main unit. After connecting a
printer, do not press the RETURN key, if provided on the printer, in 10
seconds.
• When programmed for outgoing toll calls only, printing occurs only for
calls which start with the numbers stored in any Denied Code Table
from levels 2 to 6. If LCR is employed, not the user-dialled but the
modified number is checked against these tables.
• This system can store information up to 100 calls. If more calls are
originated or received, previous records are deleted starting from the
oldest one.
• This data is not deleted when you reset the system.
• If the system clock is not set by system programming or if the calendar
IC is out of order, the date and time is not printed out.
• If Register Recall signal is manually sent out during a conversation, the
call record is printed and a new record is started.
• “(8) Cost” is printed out in the format selected in program [117]
“Charge Display Selection.”
• It is programmable to enable or disable the printout of secret dial
numbers.
• If the account code stored in location 01 of the programming table is
dialed, the dialed number is not printed out to SMDR (Private Call).
Refer to the seventh line on an example of printed call records.
• When the paper of the printer runs out or the printer is out-of-service, the
indication “Check Printer” is displayed on the telephone of Operator 1.
*: Available for KX-TD1232 only.