Panasonic KX-TD816E, Installation Manual

Page: 410 / 600

4.6 CO Line Programming
ISDN Extension Multiple Subscriber Number
427
4-112 System Programming
Description
Selects whether the Multiple Subscriber Number is allocated to
each terminal equipment on ISDN S0 bus or not on ISDN port
basis.
Selection • Port number: KX-TD816 – 01 through 04, ( =all ports)
KX-TD1232 – 03 through 06, 09 through 12,
(
=all ports)
• Enable / Disable (no number)
Default
All ports – Disable
Programming
1. Enter 427.
Display: MSN Service
2. Press NEXT.
Display: Port NO?–>
3. Enter a port number.
To enter a first port number, you can also press NEXT.
Display example: #03:Disable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another port, press NEXT or PREV, or
SELECT and the desired port number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• Port numbers 03 through 06 are for the Master System and 09 through
12 are for the Slave, if available.
• To assign all ports to one selection, press the key at step 3. In this
case, the display shows the contents programmed for a first port.
• After this assignment, you should reset the system so that this
assignment is effective.
Feature References
Section 3, Features,
ISDN Extension