Panasonic KX-TD816E, Installation Manual, Page: 440 / 600

4.8 Extension Programming
Extension Connection Assignment
4-136 System Programming
611
Description
Assigns whether the extension can perform all accesses or not.
Selection
• Jack number: KX-TD816 – 01 through 16, (-1 / -2),
KX-TD1232 – 01 through 64, (-1 / -2),
( =all jacks, -1 = first part, -2 = second part)
• Connect / No Connect
Default
All jacks – Connect
Programming
1. Enter 611.
Display: Ext Connection
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
To select the second part (-2), press NEXT after entering a jack
number.
Display example: #01–1: Connect
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another jack, press NEXT or PREV, or
SELECT and the desired jack number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• The extension of the jack number 01 should be set to “Connect.”
• In case of the KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available.
• For an explanation of jack numbering, see “Rotation of jack number”
on page 4-7.
• To assign all jacks to one selection, press the key at step 3. In this
case, the display shows the contents programmed for jack 01.
Feature References
Section 3, Features,
Extension Connection Assignment