Panasonic KX-TD816E, Installation Manual

Page: 551 / 600

8.3 DECT Portable Station Features
DECT Portable Station Section 8-31
T
ITLE
PS C
ONDITION
Extension Group
Flexible Numbering
Handset / Headset
Selection
Handsfree Answerback
Hunting Group
Station Hunting
Intercept Routing
Least Cost Routing (LCR)
LED Indication, CO Line
• The PS extension group can be used with the Group Call Pickup.
• The PS extension group can be assigned in program [658] “PS
Extension Group Assignment.”
• In addition to current flexible numbering, the feature number for the
Super EXtra Device Port (SXDP) can be assigned. For details, refer to
the program [100], “Flexible Numbering.”
• To use a headset with your PS, just connect the user-supplied headset
to the PS. Moreover, it is possible to answer calls without lifting up
the PS or pressing any key. In this case, PS Programming, “Setting the
Handsfree Answer Mode,” is required to select the answering mode.
• This feature allows PS users to answer calls, all or intercom, without
lifting up the PS or pressing any key only when the user-supplied
headset is connected to the PS. If the PS user receives a call in this
mode, a handsfree conversation is established immediately after the
user hears beep tone and the caller hears a confirmation tone.
PS Programming, “Setting the Handsfree Answer Mode,” is required
to select the answering mode.
• Program [131], “Hunting Group Assignment,” is required to assign
each PS to a hunting group.
• PSs are hunted in the No Reply or Ring hunting mode. If another
hunting mode is selected in program [106], “Station Hunting Type,”
PSs are skipped.
• In Ring hunting mode, a maximum of four PSs ring simultaneously.
If the connected CS is busy, the PSs are skipped.
• Program [674]–[675], “PS Extension Intercept Routing — Day / Night,”
is required for assigning the Intercept Routing destination for each PS.
• The possible destinations of intercepted calls are as follows.
1) a wired extension
2) an external pager
A PS cannot be a destination.
• Program [677], “PS Itemized Code Set” is required for assigning the
itemized code for each PS.
• The LED indicators of the Flexible CO buttons do not work while on-
hook.