Panasonic KX-TD816E, Installation Manual, Page: 531 / 600

8.2.4 Installing the Unit
DECT Portable Station Section 8-11
The following procedures can be used to install a 2-RF Interface
Unit with a 4-Station Line (KX-TD144) to the main unit, and then
the Cell Station (KX-TD142) to the KX-TD144.
The KX-TD1232 is illustrated as the main unit.
1. Loosen the two screws on the cover
plate. Insert your fingers into the slits
to remove the cover plate(s).
Note Any of the cover plates can be
removed as required.
2. Connect the cabinet cord of the 2-RF
Interface Unit with a 4-Station Line
(KX-TD144) to the connector in the
main unit firmly.
D1232 D1232
DIGITAL SUPER HY
BRID SYSTEM
Panasonic Panasonic
Slit
Slit
5. Secure the inside screw (included) to
fix the cabinet to the main unit.
Panasonic Panasonic
Outside screw
Inside screw
3. Hook the cabinet on the main unit and slide
the cabinet to the left until it is secured.
Panasonic Panasonic
Panasonic Panasonic
D1232 D1232
DIGITAL SUPER HYBRID SYSTEM
4. Loosen the outside screw and slide the
cover to the right.
Panasonic Panasonic
Note Be sure to fix the inside screw to the
main unit, or the unit may not work
properly.