Panasonic KX-TD816E, Installation Manual

Page: 403 / 600

4.6 CO Line Programming
Direct Dialling In — Day / Night
420/429
System Programming 4-105
Description
Assign the contract status of the Direct Dialling In (DDI) Service or
Multiple Subscriber Number on a CO line basis in both day and
night modes. This setting is also used for Calling Line
Identification Presentation (CLIP) and Connected line Identification
Presentation (COLP).
Selection
• CO line number:
KX-TD816 – 01 through 08, ( =all CO lines)
KX-TD1232 – 01 through 24, ( =all CO lines)
• Disable / Enable
Default All CO lines – Enable — Day / Night
Programming
1. Enter a program address (420 for day or 429 for night).
Display example: DDI Service Day
2. Press NEXT.
Display: CO Line NO?
→
3. Enter a CO line number.
To enter CO line number 01, you can also press NEXT.
Display example: CO01: Enable
4. Keep pressing SELECT until the desired selection is
displayed.
5. Press STORE.
6. To program another CO line, press NEXT or PREV, or
SELECT and the desired CO line number.
7. Repeat steps 4 through 6.
8. Press END.
Conditions
• In case of the KX-TD1232, CO01 through CO12 are for the Master
System and 13 through 24 are for the Slave, if available.
• To assign all CO lines to one, press the key in step 3. In this case,
the display shows the contents programmed for CO01.
• If “Enable” is selected, the subscriber number and extension number is
provided to ISDN for CLIP and COLP.
Feature References
Section 3, Features,
Direct Dialling In (DDI)