4.2 Manager Programming
Flexible CO Button Assignment
(contd.)
005
4-24 System Programming
2. Press NEXT.
Display: Jack NO?–>
3. Enter a jack number.
To enter jack number 01, you can also press NEXT.
Display: PT–PGM Mode
4. Press a CO button to be changed.
The display shows the contents pre-assigned to the button.
Display example: CO-01
5. Enter a button code (plus parameter, if required).
To change the parameter, press CLEAR and the new parameter.
6. Press STORE.
7. • To program another CO button of the same jack, repeat
steps 4 through 6.
• To program another jack, press SELECT and repeat steps 3
through 6.
8. Press END.
Cancelling
1. Perform the same procedures as steps 1 through 4 above.
2. Enter 2.
3. Press STORE.
4. Press END.
Conditions
• A centralized telephone is a telephone connected to jack 01 or a jack
programmed as a manager extension in program [006] “Operator /
Manager Extension Assignment — Day / Night.”
• There is a maximum of 16 proprietary telephones for KX-TD816, and
64 proprietary telephones for KX-TD1232.
• In the case of KX-TD1232, jack numbers 01 through 32 are for the
Master System and 33 through 64 are for the Slave, if available. Jack
numbers in the out-of-service system are unacceptable.
• The number of the CO buttons available depends on the telephone type.
(Refer to Section 3 “Buttons on Proprietary Telephones.”) To program
24 CO buttons, use proprietary telephones, KX-T7230/T7433/T7436.
• If you press the same CO button again in step 5, you can select a
desired ringer frequency for the CO button from eight types of ring
tone. When you enter the tone type number (1 through 8), you will hear
the selected tone type until STORE is pressed. This selection is
possible only for the CO buttons that have been assigned to Single-CO,
Group-CO, or Loop-CO.
Feature References
Section 3, Features,
Button, Flexible Buttons on Proprietary Telephones
Summary of Contents for KX-TD816E
