4-4
System Programming
During Normal Operation
During Programming
(PAUSE)
PAUSE / PROGRAM
(SP-PHONE)
NEXT
(REDIAL)
PREV (PREVIOUS)
(AUTO ANSWER / MUTE)
SELECT
(RECALL)
RECALL
(FLASH / RCL)
FLASH
(TRANSFER)
CLEAR
(FWD / DND)
(CONF)
– /
(INTERCOM)
SECRET
(AUTO DIAL / STORE)
STORE
(HOLD)
END
4.1.1
Using Proprietary Telephones
SKP+ SEL NEXT
Soft 1
Soft 2
Soft 3
SHIFT
SKP- CLR PREV
Soft 1
Soft 2
Soft 3
SHIFT
Type 5
Press SHIFT
to alternate
Instructions
SELECT
CLEAR
Soft button
SEL+,SEL-,or SEL
CLR
You can use either the soft buttons or the overlay buttons. (For
overlay buttons, refer to “Using the Overlay” below.)
Throughout programming you will see instructions such as “Press
PREV.” If you use soft buttons, this means press SHIFT, release
SHIFT and then press Soft 3. The (PREV) function is performed.
Note
If you use soft buttons and if programming instructions tell you to press
the following buttons, you may press soft buttons shown below.
Using the Overlay
A programming overlay is packed with the telephone at the factory.
This overlay should be used at all times while in programming
mode since the functions of the telephone keys change while in
programming mode as follows: (The original functions are in
parentheses.)
Summary of Contents for KX-TD816E
