4.11
Option Programming
System Additional Information
(contd.)
990
System Programming
4-171
Area Field
Description
Selection
Default
References
(49)
(50)
(51)
(52)
(11)
(12)
(13)
(14)
(15)
1
2
Enables or disables the CO Pulse feedback
tone.
Selects the destination during the day
mode, when operator number is sent as a
Direct Dialling In number.
Selects the destination during the night
mode, when operator number is sent as a
Direct Dialling In number.
Assigns the operation when the Master and
Slave system of KX-TD1232 are
disconnected.
If an outside party is parked or transferred
and unanswered, assigns whether Transfer
Recall occurs at the park or transfer
originating extension or at Operator 1.
If Limited Call Duration is enabled in
program [502] “Extension-to-CO Line Call
Duration Limit,” assigns if Limited Call
Duration is done for both outgoing and
incoming calls or for outgoing calls only.
Allows you to remove confirmation tone 4.
By default, a beep tone sounds when a
three-party conference is started / ended.
Determines if the dialled “
” and “#” will
be checked by Toll Restriction. This
assignment is required for certain central
offices (CO) to prevent toll fraud. Some CO
ignore the user-dialled “
” and “#.” If your
CO is such a type, select “0” (no check).
Enables or disables the Recall function
when receiving an outside call at a locked
or toll-restricted station. Recall, if enabled,
allows the user to make an outside call
using the same line at the station. This is
also allowed for those extensions that have
Account Code – Verified – All Calls mode
assigned, if “0” (disconnection signal) is
selected in field (3) above.
0 : disable
1 : enable
0 : DIL 1:N
1 : Operator
0 : DIL 1:N
1 : Operator
0 : Reset
automatically
1 : Not reset
0 : extension
1 : Operator 1
0 : both calls
1 : outgoing calls
only
0 : disable
1 : enable
0 : no check
1 : check
0 : disable
1 : enable
0
0
0
0
0
0
1
1
0
Dial Type
Selection
Direct Dialling
In (DDI)
Direct Dialling
In (DDI)
None
• Call Park
• Call Transfer,
Unscreened –
to Extension
Limited Call
Duration
Confirmation
Tone
Toll Restriction
Recall
Summary of Contents for KX-TD816E
